Potassium

The SMD foil potassium electrode K-01 is designed for the electrochemical, potentiometric determination of K+ in liquid or moist samples in combination with a reference electrode. The measured values are determined by measuring the open-circuit potential/open-circuit voltage between the two electrodes using high-impedance voltage measurement electronics.As this is a prototype functional model, there is no preliminary data sheet yet. You will receive a corresponding prototype performance results report when the item is delivered.   Once used, the sensor must be kept hydrated for further application and must not allowed to dry out.Datasheet:Datasheet_addsensors_SMD_K01_eng.pdfDesign / User Manual:Design-Setup-Guide.pdf (addsensors.com)

The stripe foil sensor Potassium-601 is a foil sensor with electrodes for the electrochemical determination of the potassium value. Our potassium sensor consists of two electrodes (a K-sensitive and a non-sensitive Ag/AgCl reference electrode) on a transparent PET foil. The measured values are determined by measuring the open-circuit potential/voltage between the two electrodes.  The reference electrode and the entire sensor can be used with analytes with different chloride concentrations thanks to a solid-state electrolyte layer. After use, the sensor must remain hydrated for further use and must not dry out.To evaluate the data, a connection can be established using our Device ion selectiv D-300. Alternatively, the data can be evaluated using ZiF contacting. The contact surfaces are provided with oxidation protection. The data given refers to the use of the sensor in combination with the device Ion selectivity D-300. The measured potential (in mV) is displayed, or if the sensor is calibrated (one-point software calibration at 21 °C or two-point calibration at other temperatures), the concentration K+ can be output.Product includes:1 x Stripe foil sensor potassium-601Datasheet:Datasheet_addsensors_stripe_potassium_S-601.pdf